Genicom microLaser 210, User Giude

Page: 49 / 212

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 3-5
Navigating the Control Panel Menus
The following figure shows the sequence of pushbuttons and display messages that would allow you
to change the number of copies printed. This example illustrates the basic relationship between
menus and submenus and demonstrates how the
NEXT, PREVIOUS , SELECT , and RETURN
buttons help you to navigate through the menus.
Figure 3-2: Navigating the Paper Menu.
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “ Paper Menu ” is shown on the second line of the dis-
play.
3. Press the SELECT button to enter the paper menu.
4. Press the NEXT button until the text “ Copies” is shown on the second line of the display.
5. Press the SELECT button to enter the copies submenu.
6. Press the NEXT or PREVIOUS button to increase or decrease the number of copies printed.
7. Press the SELECT button to save this setting.
8. Press the START/STOP button to exit the menu system.
Menu
Paper Menu Menu
Interface Menu Menu
Paper Menu
Paper Menu
Copies Copies
1 Copies
2
Copies
3
Paper Menu
Copies Menu
Paper Menu