OPERATIONS
3 -21
96622 Issue 4.0 Jan 01
TIME FORMAT
The default format for the time is
hours:minutes:seconds. If it is necessary to
change the format of the time, the user will
access this parameter whereupon the
illustrated screen comes up. The universal
time format is: hour:minutes or
hour:minutes:seconds; the colon (”
:
”) must
be input as well. Using the appropriate keys as indicated on the screen, the
message displayed will be:
th:tm:ts
or
th:tm
.
Once this message or some variation is displayed on the Controller, press the
”Enter” key.
F4 MENU
The parameters listed under the F4 key are
shown in the illustrated screen at left. If,
while programming, it becomes necessary
to start anew, reset the print station: shut it
off and then while pressing the ”Print
enable” and ”Cycle” keys, turn the print
station back on.
CAUTION
: All
parameters will return to the factory default
values.
Since the normal default condition is a falling back to the last values entered into
the Controller, to reset the Controller: after resetting the print station, query the
print station. All values in the Controller will be changed to the current values
of the print station.
LANGUAGE
The default language of the Controller is English; other choices of language
include: Spanish, Italian, French, and
Portuguese. To scroll through the language
choices, use either left or right arrow key.
When the desired language is displayed,
press the ”Enter” key.
