OPERATIONS
3 -11
96622 Issue 4.0 Jan 01
PRESENT SETTING
ANY CHANGES Y/N
00/00/00
PRESENT SETTING
ANY CHANGES Y/N
00/00/00
SET DATE
In order to load the date into the print station, press the “Date” key on the
Controller while in Command Mode. The screen will look like the illustration
on the left. Press “Y” to enter the date
starting with the month, then the day, then
the year. For single digit months and days,
enter in the zero, as in 01/01/95 for January
1, 1995.
Once the year has been entered, the date will be displayed. If correct, press “N”
to accept the values and exit. You may transfer this data to the print station or
wait until you have finished loading all data into the Controller and transfer all to
the print station at the same time.
SET TIME
In order to load the time into the print station, press the “Time” key on the
Controller while in Command Mode. The
screen will look like the illustration on the
left. Press “Y” to enter the date starting
with the hour, then the minutes. For single
digit hours and minutes, enter in the zero,
as in 09:05 for five after nine in the
morning. Time must be entered in military time (i.e., a twenty-four hour clock).
Once the minutes have been entered, the time will be displayed. If correct, press
“N” to accept the values and exit. You may transfer this data to the print station
or wait until you have finished loading all data into the Controller and transfer
all to the print station at the same time.
