32
LIMITED WARRANTY
FAILURE TO MAINTAIN YOUR EQUIPMENT WILL VOID THIS WARRANTY
Your CenterPoint™ purification system is expressly warranted from the date of installation to be free from
manufacturing defects for the coverage period stated below. Defective parts must be returned by you to the
installing contractor together with the CenterPoint™ purification system’s model number, serial number, and
documented installation date no later than thirty (30) days after the failure.
ONE (1) YEAR COVERAGE -- RESIDENTIAL AND COMMERCIAL APPLICATIONS
The covered equipment and covered components are warranted by Genesis Air for a period of ONE (1) year
from the date of the original unit installation, when installed in a residential or commercial application. If during
this period, a covered component fails because of a manufacturing defect, Genesis Air will provide a free
replacement part. You must pay shipping charges and all other costs of warranty service. Genesis Air will not
pay labor involved in diagnostic calls or in removing, repairing, servicing, or replacing parts. Such costs may be
covered by a separate warranty provided by the installer. NOTE - If the date of original installation cannot be
verified, the warranty period will be deemed to begin six (6) months after the date of manufacture.
EXCLUDED COMPONENTS
The following components are not covered by this warranty: the UVCGI lamps or the pleated photocatalytic
material. These are replacement items, which must be replaced as stated in the Maintenance section of the
installation instructions to ensure effective operation.
REPAIRS
All repairs of covered components must be made with authorized service parts by a qualified service dealer or
contractor. Labor charges are not covered by this warranty.
WARRANTY LIMITATIONS
This warranty will be voided if the covered equipment is removed from the original installation site. This
warranty does not cover damage or defect resulting from:
1 -
Flood, wind, fire, or lightning damage. Storage, installation, or operation in a corrosive atmosphere
(chlorine, fluorine, salt, recycled wastewater, urine, fertilizers, or other damaging chemicals).
2 -
Accident, or neglect or unreasonable use or operation of the equipment, including operation
of electrical equipment at voltages other than the range specified on the unit nameplate
(Includes damages caused by brownouts).
3 -
Modification, change or alteration of the equipment, except as directed by the manufacturer.
4 -
Operation with system components (indoor unit and control devices), which do not match, or
meet the specifications recommended by the manufacturer.
5
- Operation with system components (indoor unit and control devices), which exceed
operational temperature range of; -20 F to 122F.
6 – Cleaning equipment with high pressure water spray so that the PCP catalyst coating is damaged.
7 –
Damage caused by allowing non-functioning equipment to be in an air steam for a prolonged period. Air
speeds above 600 ft/min will damage equipment beyond repair.