10
Installation
Figure 2: Ducted Above Ceiling Diagram
The DT-FP unit is designed to be permanently installed above the ceiling tiles of a room. Installation
must be completed by competent personnel. The manufacturer assumes no liability for damages or
injuries sustained from installations done by persons other than qualified technicians who are
employed by the manufacturer.
Permanent Ceiling Installation
Make the following considerations when choosing an appropriate placement location.
•
The presents of structural components that will be needed to hold the DT-FP unit in place.
•
Access to 120V AC power supply.
•
Other fixtures in the vicinity of installation.
•
Clearance from preexisting ductwork, beams, sprinklers, lights, or other above-ceiling fixtures.
•
Return and supply grille locations.
•
Ease of access for maintenance personnel.
•
Install supply grille at least 10 feet away from return/filter grille.
WARNING!
Sharp Edges Hazard
Equipment with sharp edges can cause
injuries. Use protective gloves when
grasping the edges of equipment.
WARNING!
Do not use silicone to seal DT-FP unit to
ductwork. The presence of silicone in UV
light will pollute the catalyst.