Generic XOR 125, Service Manual

Page: 82 / 97

81
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear wheel and brake in the
reverse of removal, and also carry out the following steps:
□
Turn the punched mark on the camshaft to the rear axle
shaft side.
□
Install the protrusion of indicator plate to the groove of
Camshaft.
□ When installing the brake cam shaft, aligh the groove of camshaft with
the slit of on cam shaft.
□ When installing brake shoes, be sure to daub camshaft with
adequate grease.
CAUTION:
Be careful not to daub the camshaft with too much grease.
If grease gets on the lining, brake effectiveness will be lost.