General 90-200 M1, Setup & Operation Manual, Page: 8 / 40

LIST OF CONTENTS
Once the parts have been removed from the packag-
ing, you should have the following items:
QTY
BANDSAW (
WITH 93 1/2” X 3/8” BLADE INSTALLED)
. . . . .1
MITER GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
TENSION LEVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
SLIDE BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
BASE CABINET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE BAG (INSIDE BASE CABINET)
— DOOR KNOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
— DOOR BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
BLADE (105” X 3/8”)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
WORK LIGHT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
RAIL (TWO-PIECE)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
HARDWARE BAG
— HEX HEAD BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . .4
— FLAT WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
FENCE BODY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE BAG
— HEX HEAD BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . .4
— FLAT WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
— HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
— 5 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 3 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 10 MM COMBINATION WRENCH . . . . . . . . . . . . .1
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
UNPACKING
ADDITIONAL REQUIREMENTS FOR SET UP
• Extra person for help with lifting
• Phillips screwdriver (regular and small)
• Flat head screwdriver
• 12 and 14 mm open end wrench
•
12 mm socket wrench
• Feeler gauge set
• Combination square
8