Checkweigher user’s manual
13
Turn the main switch in a clockwise direction.
The main interface appears after a few seconds.
The default user level is no log.
Wait 20 minutes before weight checking.
Aims to ensure system reach the correct operating temperature.
Press <
Start
>.
Switch off device
Press <
Stop
>.
Turn the main switch in an anti-clockwise direction.
Start and stop
weight checking
Prerequisites:
- Product to be checked has been selected.
- Product parameter has been set correctly.
- Calibration has been carried out.
- The device has been switched on for at least 20 minutes.
Start weight checking: Press <
Start
>.
Start weight checking process.
Stop weight checking: Press <
Stop
>.
Stop weight checking process.
Enter/modify data
A numerical keyboard which can be operated as a normal PC keyboard will pop
up when data input box is triggered.
Prerequisite:
- A data input box
exists and it can be triggered to input data
-
Click the input box.
A numerical keyboard with data description (on the left top) appears, as Fig
6-2.
Frequent breaks where the device is switched off can affect the
precision of the weighing result. Leave the device switched on during
short breaks in production. Do not switch off the device until
production is over.
