ENGLISH
15
170130
●
Keep the tool housing and handle clean and free of oil and grease
using mild soap and a damp (not wet) cloth. Use only mild soap
and damp cloth to clean your tool since certain cleaning agents and
solvents are harmful to plastics and other insulated parts. Some of
these harmful solvents include: gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents, ammonia, and household
detergents containing ammonia.
●
The table kerf plate inserts should be replaced if damaged to reduce
the risk of chips lodging in the slot and catching in the blade.
●
If the tool is to be stored for any length of time, remove the batteries
from the laser battery compartment to prevent damage to the device.
●
Lubrication is done at the factory and with the exception of the slide
bearings, should not be necessary again under normal use.
●
An
authorized repair center should do any repairs, modification, or
maintenance that involve disassembling the saw.
●
Any damage to the tool should be corrected at an authorized repair
center. Contact General International for all repairs.
WARNING!
Never use flammable or combustible solvents
around tools.
WARNING!
To reduce the risk of injury, electric shock and damage to
the tool, never immerse your tool in liquid or allow liquid to flow
inside the tool.
Summary of Contents for MS3003
Page 16: ...ENGLISH 16...
