ASSEMBLY INSTRUCTIONS
1. Turn the 3 base plates (middle, right and left) up-
side down.
2. Attach the casters using (4) 5/16” x 1/2” flange bolts
per caster.
INSTALLING THE CASTERS:
JOINING THE BASE PLATES TOGETHER:
1. Connect the middle base plate to the side base
plates using (4) 5/16” x 1/2” (8 x 8 x 12 mm)
flange bolts for each end of the middle base
plate.
2. Screw 2 bolts in the top and one in the front and
back vertical edge as shown.
ATTACHING THE LEGS TO FAN/MOTOR ASSEMBLY:
Note: Help with lifting will be needed at this time. The col-
lector body is heavy - do not overexert.
1. With the help of an assistant turn the collector body
assembly upside down.
2. Align and attach the (4) legs to the frame of the col-
lector body using 8 x 5/16” x 1/2” hex bolts (2 per
leg). Be sure to tighten the bolts securely.
9
