UNPACKING AND PREPARATION FOR SET-UP & ASSEMBLY
UNPACKING
Carefully unpack and remove the unit and its components from its shipping containers and check for missing or
damaged items as per the list of contents below.
Note: Please report any damaged or missing items to your General® International distributor immediately.
LIST OF CONTENTS
SAFETY
Use caution and wear gloves when handling
metal parts such as the belt clamps, which can
cut if handled carelessly.
7
The model 10-510 is a heavy machine (370 Lbs.
shipping weight - 168 kg.) Do not overexert.
Arrange to have help nearby and ready for
unpacking and set up.
The sound level of this machine is rated at
approximately 85-95 db during operation. Make
sure that adequate hearing protection is used
and that the overall sound level within the work-
ing environment is taken into consideration.
ADDITIONAL REQUIREMENTS FOR SET-UP & ASSEMBLY
• Flat piece of wood (such as a ruler)
• Medium Phillips Screwdriver
• 2 extra people for help with lifting
• 10 & 12 mm open end wrench or adjustable
wrench
A. MIDDLE BASE PLATE
B. SIDE BASE PLATE
2
2
C. LEG
4
4
D. COLLECTOR BODY W/FAN & MOTOR ASS’Y
1
1
E. DRUM
2
2
F. CASTER
8
8
G. RUBBER GASKET
2
2
H. UPPER BAG SUPPORT ROD
2 N/A
I. BAG HANGER
2 N/A
J. HARDWARE & ACCESSORIES BAG
1
1
- INSTRUCTION MANUAL
1
1
- FOAM GASKET
2
2
- FLANGE BOLTS 5/16” X 1/2” 64
64
64
- HEX BOLTS 5/16” X 1”
16
16
- FLANGE BOLTS 1/4” X 1/2”
6
6
- WASHERS
32
32
- NUTS 5/16”
16
16
- PAN HEAD SCREW 3/16 X 3/8
1
1
- 10-12 mm WRENCH
1
1
K. COLLECTOR BAG
5
5
L. FILTER BAG
2 N/A
M. HOSE INLET (4-hole manifold)
1
1
N. VERTICAL SUPPORT ROD
2
2
O. CANISTER FILTER
N/A
2
P. BELT CLAMP
4
4
(N/A=NOT APPLICABLE FOR THIS MODEL)
10-510
10-510 CF
1
1
