CLEANING OR REPLACING THE CANISTER FILTERS
(MODEL 10-510CF)
Turn the switch to the “OFF” position and unplug the unit from the power source before cleaning or
replacing canister filters or before performing any maintenance.
After a period of time depending on the frequency of use, the canister filter may become clogged and affect air-
flow as well the overall efficiency of the unit. Should you notice a drop in the efficiency or performance of the unit,
it may be a sign that it is time to clean the filters.
If so, proceed as follows:
1. Turn off and unplug the machine.
2. For basic cleaning, simply rotate the handle of the
canisters several rotations,
A
. The internal flap will rub
against the corrugated inner filter and shake free any
built-up dust from inside the filter.
3. For a more thorough cleaning, after rotating the han-
dle, unclip the belt clamps and remove the canisters
from the machine and place them on the ground
upside down.
4. Vacuum the inside of the canisters to remove any
remaining dust from inside.
5. Re-install the canisters and re-attach the clamps,
B
.
15
EMPTYING THE COLLECTOR BAGS:
Turn the switch to the “OFF” position and unplug the unit from the power source before emptying or
replacing the collector bags or before performing any maintenance.
1. Turn off and unplug the machine.
2. Unclip the bag clamp,
A
,
and remove the bag from
the machine.
3. Empty the bag (or simply dispose of the bag and it’s
contents and replace with a new bag) disposing of
the contents in a safe and responsible manner that
complies with all local codes and regulations
regarding waste disposal.
4. Re-install the bag and re-attach the clamp,
A
.
Note: Depending on your needs, shop situation and local regulations collections bags can be emptied and re-used
or disposed (with their contents) and replaced with a new bag.
A
B
A
B