background image

5

RULES FOR SAFE OPERATION

To help ensure safe operation, please take a moment to learn the machine’s applications and limitations, 

as well as potential hazards. General

®

 International disclaims any real or implied warranty and hold itself 

harmless for any injury that may result from the improper use of it’s equipment.

1.  Do not operate the dust collector when tired, 

 

 

distracted, or under the effects of drugs, alcohol or  

 

any medication that impairs reflexes or alertness.

2.  The work area should be well lit, clean and free  
 

of debris.

3.  Keep children and visitors at a safe distance when  
 

the machine is in operation; do not permit them to  

 

operate the dust collector .

4.  Childproof and tamper proof your shop and all  
  machinery with locks, master electrical switches 

 

  and switch keys, to prevent unauthorized or unsu- 
 

pervised use.

5.  STAY ALERT! Give your work your undivided attention.  
 

Even a momentary distraction can lead to serious  

 injury.

6.  Fine particulate dust is a carcinogen that can be  
  hazardous to health. Work in a well-ventilated 

 

  area and whenever possible use a dust collector  
  and wear eye, ear and respiratory protection 

 

 devices.

7.  Do not wear loose clothing, gloves, bracelets, neck- 
 

laces or other jewelry while the dust collector is in  

 

operation. Wear protective hair covering to contain  

 

long hair and wear non-slip footwear.

8.  Do not insert hands, fingers or any foreign objects  
 

into ventilation inlet and outlet openings.

9.  Do not operate this machine without either a filter  
 

bag or filter cartridge properly installed on the unit.

10. Clean filters (bags on standard model or cartridges  
 

on “CF” model) on a regular basis and replace as  

 needed.

11. Do not handle the electrical plug with wet hands.

12. Do not use this unit outdoors, or near wet surfaces.

13. Always turn on the dust collector before starting  
  the dust producing machine. Always turn off the  
 

dust producing machine before turning off the dust  

 collector.

14. Do not vacuum anything that is burning, smoking  
  or smoldering such as cigarettes, matches or hot  
 ashes.

15. Do not vacuum or use this dust collector near flam- 
  mable or combustible liquids, gases, gasoline or  
  other fuels, lighter fluid, cleaners, oil or solvent 

 

  based paints, natural gas, hydrogen or explosive  
 

dusts like coal dust, magnesium dust, grain dust or  

 

gun  powder.  

16. Do not operate the unit until a dust hose is installed  
 

onto the hose inlet.

17. Never leave the machine unattended while it is run- 
 

ning or with the power on.

18. To avoid health hazards from vapors or dusts, do  
 

not vacuum toxic material.

19. Use only recommended accessories. Use of ac- 
 

cessories NOT recommended by 

General

®

 Interna- 

 tional

 may result in a risk of injury or damage to  

 

the machine.

20. Always disconnect the unit from the power source  
  before servicing, performing any maintenance or  
 

repairs and when changing bags or hoses, or if the  

 

machine will be left unattended.

21. Make sure that the switch is in the “OFF” position be- 
 

fore plugging in the power cord.

22. Make sure the tool is properly grounded. If equip- 
  ped with a 3-prong plug, it should be used with  
  a three-pole receptacle. Never remove the third  
 prong.

23. Do not use this dust collector for any purpose other  
  than its intended use. If used for other purposes,  
 

General

®

 International

 disclaims any real or im- 

  plied warranty and holds itself harmless for any  
 

injury, which may result from that use. 

Summary of Contents for 10-055



















Reviews: