BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE “OFF” POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
3.
Slide the hose onto the inlet located under the im-
peller.
4.
Tighten the hose clamp using a flat head screw-
driver. Repeat steps 1 to 2 with the other hose
clamp, then connect to the dust producing ma-
chine.
12
INSTALLING THE HOSE (CONTINUED)
INSTALLING THE FILTER BAG
1.
Fit the bag hanger support into the holes on the
separator
A
.
2.
Slip a belt clamp through the opening in the filter
bag
B,
then fit the bag on the hanger
C
.
3.
Use the belt clamp to attach the filter bag to the
separator
D
&
E
.
Note: Before tightening the clamp make sure the metal
strap is well seated on the upper portion of separator to
create an airtight seal between the fan and the bag.
B
D
E
C
A
