11
BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE “OFF” POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
INSTALLING THE IMPELLER/SEPARATOR ASSEMBLY
1.
Install the separator on the frame.
2.
Align the mounting holes
D
with the correspond-
ing holes on the two sides of frame.
3.
Insert a carriage bolt
E
into each mounting holes.
4.
Attach the separator to the frame by tightening
four nuts
F
with a 8 mm wrench.
D
INSTALLING THE HOSE
1.
Loosen the screw
A
using a flat head screwdriver
to open the hose clamp.
2.
Slide the hose clamp onto the hose.
A
F
