P.6
ATTACH THE STRUTS
ATTACH THE STRUTS
Elevator servo
Battery and receiver
Elevator servo
Rudder servo
Throttle servo
There are four scrvos you need to install. Two for
elevator, one for rudder and one for throttle.
Please reference the next pictures.
INSTALL THE BATTERY AND RECIVER
INSTALL THE BATTERY AND RECIVER
Using the hardware included with your servos.
Mount the throttle, elevator and rudder servos
onto the tray, positioning them as shown.
Examine the side of fuselage, there are five slots
here. the first one for bolt joining, the second one
for screw joining, the third one for servo wires.
the fourth one just for weight reduction, the last
one for bolt joining. Please fix the wings with
fuselage with two screws. Before you join the wings
with fuselage, Please insert the wind proof glass
into the slot. Then fix the wings with fuselage.
JOIN THE WINGS AND FUSELAGE
JOIN THE WINGS AND FUSELAGE
Examine the side of fuselage near the main landing
gear, there are slot you need to cut off the covering.
Insert the wing struts to slot and fix it inside the
fuselage. Fix the other side at the wings with screws.
1. After battery and receiver installation, cover
the setting of canopy. There are two small slots
at the front of fuselage, insert the bamboo bolts
to these two slots. Then attached the other side
with sheet metal screws.
INSTALL THE CANOPY
INSTALL THE CANOPY
C I T A B R I A - 1 2 0
C I T A B R I A - 1 2 0
