3-10
Operation
GDC 048R154-000
Figure 3-4
Diagnostics Results Screen
Monitor
The terminal interface DeskTop T1 Monitor function displays a screen
of status information concerning DTE interface signals and alarm
conditions.
Figure 3-5 illustrates the Monitor screen.
The DTE Status portion of the screen displays the current status of
nine DTE interface signals as
OFF
,
ON
, or
TRANS
.
TRANS
indicates
that the signal is transitioning, as opposed to being in a prolonged On
DT T1 Diagnostics
[0] Return to Main Menu
[1] Stop Test
1
[2] Inject Single Bit Error (ST only)
[3] Reset Counters
Current Test:
Network QRSS Self Test
2
Test Status:
Running
3
Test Duration:
x minutes, y seconds
Bit Errors:
0000 e00
4
Next Selection:
1
displays "Restart Test" when Test Status is "Stopped"
2
displays name of test selected from Diagnostic Selection screen;
identifies Network Line Loopback and DTE Local Loopback
tests as either Unilateral or Bilateral
3
or "Stopped"
4
or "NO SYNC"; displays only while a Self Test is selected
