Operation
3-5
GDC 048R154-000
through its potential settings.
3. When the desired setting is displayed, press Enter. The changed
setting goes into effect immediately.
4. Repeat steps 1 through 3 for each option you need to change.
5. After you’ve made all required changes, type selection 0,
Return
to Main Menu
.
Table 3-1, which starts below, lists the configuration options that
appear on the terminal interface display and all the settings available
for each. For more detailed descriptions of the individual option
settings and their effects on operation of the DSU you can consult
Tables 2-1 through 2-5 in Chapter 2, Installation.
Table 3-1
DeskTop T1 Configuration Option Settings
(Continued on next page)
Option
Potential Settings
[0] Return to Main Menu
Unit is under Software Control*
Unit is under Hardware Control*
[1] Network Framing:
ESF
D4
Unframed
Auto
[2] Network Coding:
B8ZS
AMI
[3] Network Line Type:
DS-1
DSX-1
* The setting of hardware switch S13-1 determines the Hard Mode/Soft Mode status
that is displayed with the Return to Main Menu selection. This screen is display-
only when the unit is in Hard Mode.
