Generac Power Systems PWRmanager, Owner'S Manual

Page: 8 / 24

4 Owner’s Manual for Generac PWRmanager 12 Relay Load Controller
General Information
LED Status
A Status LED
Off No power is available to the unit.
Red
Relay or unit is not operating normally. See
Troubleshooting
for
more information.
Flashing Orange Mode Selector Knob is not in normal position.
Blue
Unit is powered by the PWRcell system and no issues are
detected.
Green Unit is powered by the grid and no issues are detected.
B Relay LEDs
Off Relay is open.
Green Relay is closed (load is enabled).
Red
Relay is not operating normally and remained in its last state
(closed or open). See
Troubleshooting
for more information.
C
Relay Pairing
LEDs
Off Relays not paired.
Green Relays are paired as 240 V circuit.
Red
Relays are paired, but at least one relay is not operating normally.
See
Troubleshooting
for more information.
D
WiFi / Ethernet
Status LED
Green Connected to Generac server.
Blue
Unit is either connected to the Internet using local WiFi or Ethernet
connection, but it is not connected to the Generac server.
Flashing Blue Connecting to local router via WiFi.
Red Unable to connect to local router or Internet.
Flashing Green Access Point (AP) mode broadcasting.
G Grid State LED
Green Grid power is available. Unit is powered by grid.
Blue Grid power is not available. Unit is powered by PWRcell system.
Orange Grid status is unknown.