Safety Rules & General Information
Owner’s Manual for Generac PWRmanager 12 Relay Load Controller
1
Section 1: Safety
Rules & General Information
Introduction
Thank you for purchasing a Generac PWRmanager™.
You now have innovative control over your electrical
panel and the ability to automatically shed loads during
an outage to help ensure your PWRcell
®
system lasts
throughout the outage.
The information in this manual is accurate based on
products produced at the time of publication. The
manufacturer reserves the right to make technical
updates, corrections, and product revisions at any time
without notice.
Read This Manual Thoroughly
If any section of this manual is not understood, contact
the nearest Independent Authorized Service Dealer
(IASD) or Generac Customer Service at 1-888-436-3722
(1-888-GENERAC), or visit
for start
-
ing, operating, and servicing procedures. The owner is
responsible for safe use of the unit.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions that must be fol
-
lowed during operation of the unit. Always supply this
manual to any individual that will use this unit.
Safety Rules
The manufacturer cannot anticipate every possible
circumstance that might involve a hazard. The alerts in
this manual, and on tags and decals affixed to the unit,
are not all inclusive. If using a procedure, work method,
or operating technique that the manufacturer does not
specifically recommend, verify that it is safe for others
and does not render the equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be
hazardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
NOTE:
Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
How to Obtain Service
When the unit requires servicing or repairs, contact Gen
erac Customer Service at 1-888-GENERAC (1-888-436-
www.generac.com
for assistance.
When contacting Generac Customer Service about parts
and service, always supply the complete model and
serial number of the unit as given on its data decal
located on the unit. Record the model and serial numbers
in the spaces provided on the front cover of this manual.
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Summary of Contents for PWRmanager
Page 23: ......
