Generac Portable Products pp5000t, Owner'S Manual

Page: 4 / 20

Generac Portable Products PP5000T Generator
4
120 Volt AC, 20 Amp Duplex Receptacle — May
be used to supply electrical power for the operation
of 120 Volt AC, 20 Amp, single phase, 60 Hz
electrical lighting, appliance, tool and motor loads.
120 Volt AC, 30 Amp Receptacle — May be used to
supply electrical power for the operation of 120 Volt
AC, 30 Amp, single phase, 60 Hz electrical lighting,
appliance, tool and motor loads.
120/240 Volt AC, 20 Amp Receptacle — May be
used to supply electrical power for the operation of
120 and/or 240 Volt AC, 20 Amp, single phase,
60 Hz electrical lighting, appliance, tool and motor
loads.
Circuit Breakers (AC) — Each receptacle is
provided with a circuit breaker to protect the
generator against electrical overload. Breakers are
"push to reset" type.
Engine Control Switch — Puts engine in starting
mode/Shuts off a running engine.
Fuel Shut Off Valve — Controls fuel supply to
engine.
Fuel Tank — Capacity of 5 U.S. gallons (19 liters).
Grounding Wing Nut — Provides a tie-point for
connecting the generator frame to earth ground.
KNOW YOUR GENERATOR
Read this owner’s manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Circuit Breakers (AC)
Fuel Tank
120 Volt, 30 Amp,
AC Receptacle
Engine Control
Switch
120/240 Volt, 20 Amp,
AC Receptacle
120 Volt, 20 Amp, AC
Duplex Receptacles
Grounding Wing Nut
Fuel Shut–Off
Valve