Outdoor Router P-380
Users Guide
Host Name
is the name under which the device will appear for example in the AP Search tool.
DNS Server Address
is the IP address of a domain name server. This IP address, provided by your
ISP, will be assigned to all PCs requesting address information through DHCP from the P-380.
Available in AP router mode only!
If you are not sure about the IP address of the DNS server currently responsible for your
local network, please get your IP configuration with “ipconfig” (Win 2000, Win NT and
Win XP) or “winipcfg” (Win 9x and Win Me) from the command prompt.
System Identification
is a more specific device name for better identification by service staff.
Address
is the street and postal address of the location where the device is deployed.
Coordinates
specifies the longitude and latitude or other coordinates of the device location.
Customer name
is the customer’s name
Please note: All of the parameters above on the general configuration setting page are
required!
6.4.3 Network Configuration Settings
On the network configuration settings page you can modify the IP settings for the P-380 and the
default gateway.
WAN Interface Settings
Figure 20 – Network configuration settings: WAN interface
Interface
: Use this option to switch the WAN interface of P-380 on (Enable) or off (Disable).
Available in AP router and client router mode only!
Note: In AP router mode you disable the
wired
interface to the Ethernet using this radio
button. When the interface is disabled, there are no connections possible between
Ethernet devices and the P-380(see Comparison of the Operating Modes).
In client router mode you disable
wireless
interface using this radio button. When the
interface is disabled, there are no connections possible between wireless devices and
the P-380 (see Comparison of the Operating Modes).
IP Address assigned by ISP
is the device’s IP address on the WAN interface. If the DHCP client
function is enabled, the IP address assigned by the DHCP server will be used. If no DHCP server can
be found via WAN interface, the IP entered here will be used.
Gemtek Systems
Page 26
