Outdoor Router P-380
Users Guide
6.3 Device
Status
The device status page shows some information about the P-380 itself, its position in your network
and the data traffic on the wireless interface.
Figure 17 – Device status
6.3.1 System
Status
Version
is the current version of the firmware. This is important information for support requests and
for preparing firmware upload.
Uptime
is the time in days since last system reboot.
Average Load
shows the average load of the P-380 processor.
System Memory Total
shows the total P-380 memory.
System Memory Free
shows the currently available P-380 memory.
6.3.2 Network
Status
Device Mode
shows the P-380 operating mode (AP or Bridge).
Hostname
shows the name of the P-380 in the network used for statistic routines.
Wireless Interface IP
is the IP address of the wireless interface of the P-380.
6.3.3 Network
Statistics
In the list of all Interfaces you can find information about the data traffic on the wireless interface:
Tx Data:
data volume transmitted successfully [MB]
Tx Errors:
errors while transmitting data
Rx Data:
data volume received successfully [MB]
Rx Errors:
errors while transmitting data
Collisions:
number of data packet collisions
Gemtek Systems
Page 24
