Outdoor Router P-380
Users Guide
5.8 Reset to Factory Defaults
If you have configured your device in a way, that you cannot get access via browser or CLI to modify
parameters, you can set the device back to factory defaults using the AP Search tool.
1. Enter the MAC (Media Access Control) address of your P-380 into the specified field on the
bottom left corner of the window. You will find the MAC address label on the rear of the
housing.
2. Enter the IP address into the “IP to set” field.
3. Click the
Reset
button. The AP Search tool will now find the device and set it back to factory
defaults.
Note: Keep in mind that resetting the device is an irreversible process.
During the
first five minutes
after reboot there is no admin password required for reset-
to-factory-default or IP set.
Gemtek Systems
Page 21
