(3)
(3)
(3)
(3)
(3)
VOLTAGE SELECTOR:
To set the proper voltage, adjust the
VOLTAGE SELECTOR (1)
switch to
115
or
230
volts.
POWER JACK (AC IN):
Connect the power plug into the
POWER JACK (2)
for power.
REMOTE CONTROL:
Use the included
CABLE
&
REMOTE CONTROL (3)
to connect the
REMOTE CONTROL
to the
MAIN UNIT
.
LINE OUTPUT JACKS:
LINE OUTPUT JACKS (4)
provide stereo sound via
RCA
cables to your
MIXER
or
RECEIVER
.
NOTE: MAKE SURE CABLES ARE PLUGGED IN TIGHT FOR OPTIMAL SOUND.
DIGITAL OUTPUT (BNC):
Use the
BNC (5)
jack to connect to any type of device that accepts
DIGITAL SIGNALS
.
POWER:
Press the
POWER (6)
button to turn on the CD player.
NOTE: MAKE SURE VOLTAGE SELECTOR SWITCH (1) IS SET BEFORE USE.
DISC TRAY:
Put a CD in the
DISC TRAY (7)
after pressing
OPEN/CLOSE (8)
; trays
hold both
12 cm
and
8 cm
CDs.
OPEN/CLOSE:
Tap
OPEN/CLOSE (8)
once to open the tray and again to close it.
DISPLAY:
The
DISPLAY (9)
shows the various functions for the CD Player. See
FUNCTION DESCRIPTIONS
for details.
PLAYBACK DISPLAY BAR:
The
PLAYBACK DISPLAY BAR (10)
shows the
TIME ELAPSED
and
TIME REMAINING.
PLAY/PAUSE:
Press
PLAY/PAUSE (11)
button to activate
PLAY
or
PAUSE
mode. See
CUE
or
ROBO START
INSTRUCTIONS
for details.
CUE/PREVIEW:
Tap
CUE/PREVIEW (12)
to come back to a set
CUE
or press and hold to
PREVIEW
from a
CUE
,
refer to
CUE INSTRUCTIONS.
SEARCH (FOLDER/FILE):
Use the
SEARCH (13)
buttons to scan forward and reverse directions on a
TRACK.
In
MP3
mode use the
FOLDER
button to view which folder is being read and use the
FILE
button to view the file.
TRACK SEARCH:
Press the
TRACK SEARCH (14)
buttons to select which
TRACK
to play.
TIME:
Tap the
TIME (15)
button to switch the
TIME
preference in three modes
:
ELAPSED, REMAIN, TOTAL REMAIN.
STOP:
Press
STOP (16)
once to stop the CD.
SINGLE:
Tap
SINGLE
(17)
for
: SINGLE AUTO CUE
,
CONTINUOUS
, and
NORMAL
modes.
FLY CUE:
FLY CUE (18)
sets a
CUE POINT
on the fly.
B/EXIT:
Press
B/EXIT (19)
in
PLAY
mode, after a
CUE POINT
is memorized to start a
LOOP
, press again to exit
LOOP.
B-EDIT:
Press
B-EDIT (20)
and use the
JOG WHEEL (22)
to edit an existing
LOOP,
press again to exit
EDIT
mode.
RETURN:
To play from a saved
CUE POINT
or a
LOOP
, press
RETURN (21)
to play the
LOOP
or the
CUE
again
.
JOG WHEEL:
The
JOG WHEEL (22)
has various functions
:
PITCH BEND
,
CUEING
, and
TRACK SEARCHING
.
JOG MODE:
Press to change the
JOG MODE (23)
of the
JOG WHEEL (22)
from
MUSIC
to
TRACK
mode.
JOG MODE LED:
The
JOG MODE LED (24)
displays which
JOG MODE (23)
is in use.
PITCH:
The
PITCH (25)
button activates the
PITCH CONTROL SLIDE (27)
PITCH BEND:
Buttons for
PITCH BEND (26)
, lower or raise the pitch percentage
(- or +) 4%
when pressed.
PITCH CONTROL SLIDE:
Moving the
PITCH CONTROL SLIDE (27)
up or down will lower or raise the pitch
percentage
(- or +)
4%
,
8%
,
&
16%.
VPS (VARIABLE PITCH SELECTOR) 4%, 8% & 16%:
Use the
VPS (28)
buttons use to change the
PITCH
settings
from
4%
,
8
%,
&
16%
.
ROBO START:
Using
ROBO START (29)
enables you to alternate play between two CDs using both sides.
QUICK START GUIDE:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
