Gemini Software Operation
Gemini 720is Imaging Sonar
Document: 0703-SOM-00002, Issue: 1
46
© Tritech International Ltd.
To enable data input to the system select
Enabled
for the
COM Ports
or
Gemini Hub
.
The
COM Ports
drop-down list is for serial ports that are connected to the computer
(either natively or through an RS232 to USB converter) and is also for configuration of the
RS232 functionality of the Gemini Sonar head. The
Gemini Hub
drop-down list is only for
configuration of connected Gemini Hubs.
Selecting
Enabled
for either
Gemini Hub
or
COM Ports
will alter the tab options in the
bottom left of the screen. If both are disabled there will be no tabs visible and the status area
will only display information about connected Gemini heads.
With
Gemini Hub
selected.
With
COM Ports
selected.
With
Gemini Hub
and
COM Ports
selected.
5.3.1. Sonars & Sensors
The
Sonars
tab is for displaying information and is the same display when no tabs are
present (for a full description see Section 5.2.1, “System Data”).
The
Sensors
tab is for displaying extra information from connected RS232 sensors.
