13
Operation Manual
Toll Free: 800-635-0289 • Email: [email protected] • Web: www.ametekfactoryautomation.com
Chapter 4: Certification and Warranty
The factory certifies that the Gemco Series 1999 Semelex II Safetimeter has been inspected and tested at the factory
prior to shipment and meets requirements defined by the contract under which it is furnished.
All products of the factory are warranted against defective material and workmanship for a period of one year from
the date of delivery. The factory will repair or replace, at their option, all defective equipment returned (transportation
charges prepaid) during the warranty period without charge, provided there is no evidence that the equipment has
been mishandled or abused. This warranty does not apply to expendable parts or materials whose normal life is
less than the warranty period, nor is the factory liable for consequential damages arising out of use or handling of its
products.
4.1: Annual Calibration
Semelex Safetimeter is a safety device that is used to measure
stopping time and calculating safety distances. It is highly
recommended that the device be returned to the AMETEK factory
on an annual basis for inspections and calibration. There is a sticker
on the inside panel that will show when your unit is due for its next
calibration. To start the calibration process, simply send an email to
to request a Return Material Authorization
(RMA) Number.
4.2: Optional 5 Year Warranty - (1999OPT5YRWRNTY)
The Semelex II Safetimeter Optional Five Year Limited Warranty Limited Warranty Plan Includes:
1.
Limited Warranty Seller warrants its products against defects in workmanship and materials of the items
purchased under this order provided, however, that notice of such defect is received in writing by Seller within
five years from the date of delivery of the item under this order. Seller’s liability under this clause is restricted to
replacing, repairing, or issuing credit (at Seller’s option) for any return unit and only under the following conditions:
(1) Seller must be properly notified in writing as soon as possible after the defects have been noted by the
customer, but no later than five years from date of delivery. (2) The defective merchandise is to be returned to
place of manufacture; shipping charges prepaid by the customer. (3) Our inspection of the returned units shall
disclose to our satisfaction that the units were defective in workmanship or material at the time of delivery.
ALL OTHER WARRANTIES, FOR ANY OF SELLER’S PRODUCTS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR PURPOSE ARE EXCLUDED.
2.
Four Annual Re-Calibrations Annual factory re-calibrations of the units are required to ensure accuracy of test
results. Under the conditions stated in the above warranty, the Seller will provide four (4) annual re-calibrations
of the unit, at no charge, during the life of the warranty (1 per year, during the 5 year extended warranty period).
Shipping of the unit to and from the manufacturer for re-calibration is the responsibility of the customer.
