9
3. Feed the filament (continued)
:
You might want to test the printer
extrusion before executing a real print
task. Make sure the printer is prepared to
print PLA first (nozzle has to reach a
certain temperature first). Choose from
the menu:
Prepare → Move Axis →
Move 0.1 mm → Extrude. And then turn
control knob to adjust the extrusion
4. Test the extrusion
To make sure the filament reaches the nozzle tip,
you can choose to print the file input.gcode
located on SD card (supplied with the printer).
This file will make sure the filament reaches the
nozzle automatically.
Filament