10
Replacing the filament:
Before you can feed the new filament the old
filament has to be removed from the printer.
The filament might get stuck inside or outside
the printer. There are two possible solutions
to this problem:
Solution 2:
Keep pressing the blue button and pull out the white tube first. Then
pull out the filament from the tube.
If you wish to change printing colors you
would have to replace the filament.
Note
: please, warm the nozzle to over
190 degrees Celsius before you start
replacing the filament,otherwise it
cannot be pulled out properly.
Right side of the printer
Left side of the printer
Solution 1:
Keep pressing the button while pulling the filament out at the
same time
Filament