9
3. Doorvoeren van filament
(vervolg)
:
U wilt misschien de printer extrusie
testen voordat het uitvoeren van een
echte afdruk taak gaat starten. Zorg
ervoor dat de printer is ingesteld om PLA
eerst af te drukken (nozzle moet eerst
een bepaalde temperatuur bereiken).
Kies in het menu: Bereid → Move Axis
→ Move 0,1 mm → Extrude. En draai de
knop om de extrusie aan te passen
4. De extrusie testen
Om ervoor te zorgen dat de filament de nozzle tip
bereikt, kunt u ervoor kiezen om het bestand
input.gcode op SD-kaart (met de printer
meegeleverd) te printen.
Dit bestand zal ervoor zorgen dat de filament
nozzle automatisch bereikt.
Filament