V
02/18
4
•
General safety regulations
OptiStar CG08(-C)
3. Observance of the operating, service and maintenance
instructions specified by the manufacturer is also part of
conformity of use. The OptiStar CG08(-C) should only be used,
maintained and started up by trained personnel, who are
informed about and are familiar with the possible hazards
involved.
4. Start-up (i.e. the execution of intended operational tasks) is
forbidden until it has been established that the OptiStar CG08(-
C) has been set up and wired according to the guidelines for
machinery (2006/42 EC). EN 60204-1 (machine safety) must
also be observed.
5. Unauthorized modifications to the OptiStar CG08(-C) exempt the
manufacturer from any liability from resulting damage.
6. The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
7. Furthermore,
the
country-specific safety regulations also must be
observed.
Product-specific safety measures
-
Installation work performed by the customer must be carried
out according to local regulations.
-
All components must be grounded according to the local
regulations before start-up.
OptiStar CG08 Gun control unit
The OptiStar CG08(-C) Gun control unit is a constituent part of the
equipment and is therefore integrated in the system's safety concept.
If it is to be used in a manner outside the scope of the safety concept,
then corresponding measures must be taken.
NOTE:
For further security information, see the more detailed Gema safety
regulations!
