V
02/18
OptiStar CG08(-C)
Initial start-up
•
27
Initial start-up
NOTE:
The gun control unit always starts up to the last configured
settings.
System parameters
The OptiStar CG08(-C) Gun control unit is configured by using the
system parameters. This configuration will be saved in the equipment
memory. These values can be adjusted and requested manually or by
remote interface (CAN).
Entering the system parameters
1. Turn on the gun control unit with the
ON
key
2. Hold
key down for 5 seconds
The display switches to the following level:
3. The system parameter number is shown in the display
A1
with a
P
placed in front
4. Set the corresponding system parameter value with the
T5
or T6
key.
The value of the adjusted system parameter appears on
corresponding display
A3
5. Browse to the next or previous system parameter with the
T1
or T2
key
A3
A1
T5 / T6
T1 / T2
