manualshive.com logo in svg

Gema OptiFlex Pro B Spray, Operating Instructions And Spare Parts List, Page: 44 / 58

Share
Download
Gema OptiFlex Pro B Spray Operating Instructions And Spare Parts List Download Page 44

 

Rev. 00  03/19

 

44  

  Maintenance / Repairs 

OptiFlex Pro B Spray 

Cleaning the fluidizing/suction unit 

 

1.  Remove the suction hose from the application pump 
2.  Remove the fluidizing/suction unit 
3.  Clean the fluidizing/suction unit with compressed air. Also blow off 

the suction hose with compressed air 

4.  Reinsert the fluidizing/suction unit 
5.  Reconnect the suction hose 

 

Repair work 

 

In the event of malfunctions or faults, the product must be checked and 

repaired by an authorized Gema service workshop. The repairs must only 

be performed by an authorized specialist. 
Improper tampering can result in serious danger for user and equipment. 

 

Periodic checks 

 

The periodic checks include examining all connecting cables and hoses. 
The corresponding parts should be replaced immediately if any damage 

to cables or hoses is discovered. 
All plugs must be properly tightened. 

 

 

 

Summary of Contents for OptiFlex Pro B Spray



























































Reviews:

No comments