Gema OptiFlex Pro B Spray, Operating Instructions And Spare Parts List

Page: 29 / 58

Rev. 00 03/19
OptiFlex Pro B Spray Operation  29
Operation
WARNING
Holding the gun incorrectly
During the coating process, the gun can discharge along the body
of the coater if not held using its intended handle, which has been
grounded.
► Always hold gun only by the handle!
► Do not touch any other parts of the gun!
Bedienung
Operation
CAUTION
Large dust formation possible!
If the manual equipment is not being used for coating in
conjunction with a sufficiently powerful suction unit, then the
stirred-up dust from the coating powder can cause respiratory
issues or cause a slippage/falling hazard.
► The manual equipment may only be operated in conjunction with
a sufficiently powerful suction unit (such as Gema Classic Open
booth).
1. Swivel aside the fluidizing/suction unit
2. Place the open powder container on the vibrating table
CAUTION
Hand injury!
When placing a container on the vibrating plate, fingers caught in
the gap between the two plates can be crushed.
► The container may weight a max. of 30 kg.
3. Place the fluidizing/suction unit onto the powder
4. Set coating parameters