Gema OptiFlex Pro B Spray, Operating Instructions And Spare Parts List

Page: 30 / 58

Rev. 00 03/19
30  Operation OptiFlex Pro B Spray
Select predefined operating mode (Preset mode)
1. Turn on the gun control unit with the ON key
2. Press the corresponding application key.
The arrow above the desired button lights up.
The pre-defined application modes have preset values for high
voltage and spray current:
Application mode Preset µA Preset kV
flat parts 100 100
complicated parts 22 100
overcoat 10 100
3. The air values for total air, powder output and electrode rinsing air
can be individually defined and are saved in the programs.
Starting the individual adjustable programs
1. Turn on the gun control unit with the ON key
2. Press the program key
3. Select the desired program (01-20)
Program 20 active
4. Change the coating parameters as required
Programs 01-20 are preset at the factory but can be modified at
any time, after which they are automatically stored.
Description Presetting
Powder output 60 %
Total air 4.0 Nm³/h
High voltage 80 kV
Spray current 20 µA
Electrode rinsing air 0.1 Nm³/h
Fluidizing air 1.0 Nm³/h (for device type F)
0.1 Nm³/h (for device type B and S)