GEM genesys s, Release Notes

Page: 9 / 32

assign a user scale to a pad Page5
release notes Genesys series
Press the EDIT button in the programmable pads
section. The edit page is shown on the display.
2
Select a PAD to assign the USER scale using the
UP/DOWN CURSOR. (the pad n.4 is used in this
example)
3
Once you have selected the PAD, assign the SCALE
function by rotating the DIAL
By pressing PAD n. 4 you can now recall in realtime the
temperament you have programmed in the USER scale 1.
The programmable pad set up can be stored in one of the internal MEMORIES or stored in realtime by using
the LOCK function [F8]. Please refer to the relative section in the owner manual.
ASSIGN A USER SCALE TO A PROGRAMMABLE PAD
1 5
select the PAD n. 3 with the CURSOR, assign the
SCALE OFF function by rotating the DIAL
Now it is possible to select another pad to assign a
different USER scale or the SCALE OFF function, to
restore the normal temperament during your per-
formance
Pressing the PAD n. 3 (SCALE OFF), you restore the normal
temperament (EQUAL).
4
Moving to the next fi eld (USER 1) using the RIGHT CUR-
SOR. Here you can select the USER scale memory to
assign to the PAD. (USER scale location from 1 to 8)