GEM genesys s, Release Notes

Page: 7 / 32

MIDI In
MIDI Out
MIDI In
MIDI Out
release notes
Genesys series
microtuning response programming
Page3
GENESYS MICROTUNING RESPONSE PROGRAMMING
In Genesys the global Microtuning response can be set in order to affect ALL the PARTS both played in
realtime and triggered by the styles, or only the solo PARTS played in realtime, without affecting the parts
triggered by the styles. You can select the option you prefer.
Concept:
1 Press the button SYSTEM on the panel
2
Select the TUNING&SCALE menu using the
CURSOR, then press ENTER
Steps:
The instrument enter the TUNING&SCALE
menu.
4
Select now the UPPER option by rotating the DIAL
3 Press the function button F2 PART SELECT
The default set up is ALL. This mean that detuning
one note with the AS1, ALL the same notes and ALL
the instruments used in your performance will be
detuned (even those triggered by the accompani-
ment tracks).
Example with PART SELECT=ALL (default)
Play on the keyboard using the styles and press any
of the ARABIC SCALE detune buttons on the AS1,
for example F#. In this way all the notes=F# will
be detuned, in all octaves and in all the instruments
of the used section (realtime and styles).
Selecting the UPPER mode, only the notes of the
realtime tracks assigned to the UPPER section will
be affected by the AS1 detuning.
Example selecting PART SELECT=UPPER
Play on the keyboard using the styles and press any
of the ARABIC SCALE detune buttons on the AS1,
for example F#. In this way only the notes=F# of all
the octaves assigned to the UPPER sections (soloist
sounds), will be affected by the detuning.