GEM genesys s, Release Notes

Page: 19 / 32

ASSIGN TO A PAD THE MUTE OF THE SEQUENCER TRACKS
It is now possible to assign (using one or more of the programmable pads) the MUTE function from any sequencer
track. This provides you the ability to obtain a very powerful “Minus One” realtime function. Typically this func-
tion is used to mute the lead melody in a Song (track n. 4), however you can choose to mute any track of the
sequencer (from 1 to 32).
1
Press the [EDIT] button in the programmable pads section. The edit page is shown on the
display.
2
Select the PAD to assign the mute function using the UP/DOWN CURSOR.
3
Once you have selected the PAD (n. 1 in this example), select the MUTE/DEMUTE function by
rotating the DIAL.
The default mute channel is assigned to the #4, the track and the relative Midi channel, where
the lead track is memorized usually.
4
Move on the TRACK fi eld using the RIGHT CURSOR to modify the track you want to mute.
5
Then Use the DIAL to modify the value. You can assign any of the sequencer track from #1
to #32.
The operation can be repeated, selecting different programmable pads, in this way you can
prepare different buttons to realtime perform with the Song Player section.
The programmable pad set up can be stored in one of the internal MEMORIES or saved in real-
time using the LOCK function [F8]. Please refer to the relative section in the owner manual.
assign the track mute to a pad Page15
release notes Genesys series