GEM 543 eSyStep, Operating Instructions Manual

Page: 45 / 64

12.4.18 Basic Settings
The different settings are summarized with the Basic Settings parameter.
In-
dex
Sub-
In-
dex
Off-
set
Access
Rights
Length Parameter Type Default Values
0x50 1 0 R/W 1 bit Inversion of
LED Colours
Boolean 0 0
1
2 1 R/W 1 bit On Site Initialization Boolean 0 0
1
3 1 R/W 1 bit Operating Mode Boolean 0 0
1
4 3 R/W 1 bit IO-Link Process
Data
Boolean 0 0
1
Description of parameter values
Parameter Values Description
Inversion of LED
Colours
0 (Standard) LEDs Close = green and Open = yellow ( not inversed).
1 (Inversed) LEDs Close = yellow and Open = green (inversed).
On Site Initialization 0 (Enabled) On-site initialization (see “Initialization“, page 55) activated.
1 (Disabled) On-site initialization (see “Initialization“, page 55) deactivated.
Operating Mode 0 (Positioner) The actuator is in positioner mode.
1 (OPEN/CLOSE) The actuator is in OPEN/CLOSE mode.
IO-Link Process
Data
0 (Disabled) Use of IO-Link process data (see “Process data“, page 35) is
deactivated.
1 (Enabled) Use of IO-Link process data (see “Process data“, page 35) is
activated.
GEMÜ 543
Positioner (Code S0)
www.gemu-group.com
45 / 64
12 Specific data IO-Link (pin 6)