17 / 32
1434 µPos
Contents
1
Notes for your safety
17
1.1
General information
17
1.2
Safety notes
18
1.3
Correct use
18
1.4
Information on use in damp
conditions
19
1.4.1 Converting to protection
class IP 67
19
1.5
Installation position
20
1.6
Tools required for installation and
assembly
20
1.7
Service and maintenance
20
2
Manufacturer’s information
20
2.1
Delivery
20
2.2
Function
20
3
Mechanical mounting
21
3.1
Assembling the travel sensor
21
3.2
Mounting the positioner
22
3.3
Mounting the external travel
sensor (only for version with
remote mounting)
23
3.4
Mounting the positioner using a
mounting bracket
23
4
Pneumatic connections
24
5
Electrical connections
24
6
Initialisation and
commissioning
24
6.1
Electrical and pneumatic
connection
25
6.2
Automatic initialisation
25
6.3
Commissioning
25
7
Display elements
26
8
Error messages
27
9
Disposal
27
10
Returns
27
11
Information
27
12
Dimensions
28
13
Technical data
29
14
Order data
30
15
EU Declaration of Conformity
31
1
Notes for your safety
Please read the following notes carefully and
obser
ve them!
1.1
General information
Important requirements to ensure that our
GEMÜ 1434 μPos works correctly:
• Correct transport and storage
• Installation and commissioning by trained
personnel
• Operation according to these installation,
operating and maintenance instructions
• Recommended maintenance
All rights including copyright
and industrial property rights are
expressly reserved.
The GEMÜ 1434 μPos must be used
in accordance with these directions.
All information in these installation,
operating and maintenance instructions
regarding operation, servicing and
maintenance must be observed and
applied. If the information is not
observed, the operator’s guarantee
rights and the manufacturer’s legal
liability cease.
The manufacturer shall assume no
responsibility for the GEMÜ 1434 μPos
if this safety information is not observed.
Therefore, you must observe:
• the contents of these installation, operating
and maintenance instructions
• the relevant safety regulations for the
installation and operation of electrical
systems
• that this device must not be used in
potentially explosive areas.
The regulations, standards and guidelines
named in these installation, operating and
maintenance instructions are only applicable
in Germany. If the GEMÜ 1434 μPos is
used in other countries, the local applicable
regulations must be observed. When
dealing with harmonised European norms,
standards and guidelines, these apply within
the Single European Market. The operator
must also adhere to national rules and
guidelines, if applicable.
The descriptions and instructions in these
