GEL Decal 110, Operation And Maintenance Manual, Page: 51 / 228

ENGLISH
51
5 - GENERAL DIRECTIONS
• To best use your appliance, we recommend to carefully read this instruction manual.
• The water softener must be installed in a dry room protected from frost and hygienically suitable, away
from sunrays and accessible for future maintenance, cleaning and salt refilling.
• If the unit has been laid down or turned upside down, wait at least 8 hours before starting it up.
• The installation and the electrical connection must be carried out by a qualified technician, by observing
the national regulations in force and the instructions listed in section 9 of this manual.
To avoid dangers of electrical shocks, never open the timer.
Before any maintenance or cleaning operation, unplug the unit.
The electrical system must be fitted with a good earthing in compliance with the national regulations
in force.
Do not pull the power supply cable for unplugging the unit.
6 - ASSEMBLING AND DISASSEMBLING
Any possible assembling of the components must be carried out by the authorized Technical Assistance
Service.
If within the first 2 years of warranty the softener needs to be moved to another location, it will be necessary
to call the authorized Technical Assistance Service for a new start up and testing.
7 - HANDLING & TRANSPORT
7.1 HANDLING
• Handle the softener by keeping the original packaging.
• Do not turn upside down, but respect the direction of the arrows printed on the packaging.
• Use suitable handling systems.
• Do not stack.
• Do not cause crashes.
• For Decalux models watch out to the possible loss of balance when handling.