GEL Decal 110, Operation And Maintenance Manual, Page: 47 / 228

ENGLISH
47
COMPONENTS OF THE WATER SOFTENER
The softener is the absolute solution to scale problems in water. Very easy to install and to use, it is made
up of a container for the resins, a container for the salt, necessary for periodically regenerating the resins,
and a hydropneumatic valve which, controlled by a timer, carries out the regeneration cycles necessary to
keep the unit efficient.
Note : In Decal and Duplex models the brine tank is separated from the valve/ timer group.
IMPORTANT: the softener may be installed on municipal water only. For different applications
(on well water, etc.) please ask GEL Export Department by e-mail (export@gel.it) for the written
authorisation indicating the serial number of the softener.
1 - Timer
2 - Valve
3 - Cabinet (resins container, salt tank)
4 - Vessel with resins
5 - Trap
6 - Brine valve
7 - Mixing valve
8 - Chlorine cell
9 - Brine suction hose
10 - Drain hoses
11 - Drain
12 - Vessel base
INSPECTION
Upon receipt of the water softener:
• check that the packaging and the softener itself have not been damaged during transport
• check that the carton contains the following components:
Decal Models:
• group vessel-valve-timer;
• brine tank, fitted with trap and
brine valve;
• reinforced hose;
• brine suction hose;
• hardness kit;
• instruction manual.
Decalux Models:
• group cabinet-vessel- val-
ve-timer;
• brine suction hose;
• hardness kit;
• instruction manual.
Duplex Models:
• no. 2 groups vessel-valve-ti-
mer;
• no. 1 brine tank, fitted with
trap and brine valves;
• no. 2 reinforced hoses;
• no. 2 brine suction hoses;
• hardness kit;
• instruction manual.