3
www.geiger.de
EN
EN
3. Intended use
The motors of the GSI56.. E12 SMI series with electronic end stop are designed for operation
with Venetian blinds that are within a façade whereas the motor is outside the cavity.
The motors may not be used for the operation of roller grilles, garage doors, furniture and lifting
tools.
GJ 56 xx
x
Design options
Torque in Nm
Motor diameter
GEIGER INline System
4. Safety instructions
I
ATTENTION: Important safety instructions. For personal safety,
it is important to follow these instructions. Please keep these
instructions for future reference.
f
Do not allow children to play with stationary controls. Keep remote controls away
from children.
f
The installation is to be checked regularly for defective balance, signs of wear or
damaged cables and springs, if relevant.
f
Do observe the moving sun protection system and keep persons away until it has
closed completely.
f
When operating the manual release with the sun protection system open, please be
cautious as it can fall down quickly if springs or tapes wear off or are broken.
f
Do not operate the device if operations such as, for example, window cleaning are to
be carried out in the vicinity.
f
Disconnect the automatic controlled device from the mains power supply if opera-
tions such as, for example, window cleaning are being carried out in the vicinity.
f
During operation observe the danger zone.
f
Do not use the installation if people or objects are in the danger zone.
f
Urgently shut down damaged installations until repair.
f
Unconditionally shut down the unit during maintenance and cleaning operations.
f
Pinching and shearing points are to be avoided and must be secured.
f
This appliance can be used by children aged 8 and above and persons whose
physical, sensorial or mental capacities are impaired, or who have no experience or
know-how if they have been supervised or been given instructions on the use of the
appliance and if they understand the possible resulting dangers. Children are not
permitted to play with the device. Cleaning and maintenance should not be carried
out by children.
f
The rated sound pressure level is less than 70 dB(A).
f
Disconnect the device from the mains power supply for maintenance and replace-
ment of parts.
If the motor is disconnected via a plug connection the operator must be able to
control - from any place to which it has access – that the plug is removed.
If this is not possible - due to design or installation - the disconnection from the
power supply must be ensured via locking in the disconnected position (e.g. isolator).
f
The motor tube can get very hot during prolonged use.
When working on the unit, do not touch the tube before it has cooled down.
