GEIGER GEIGER-Easy-ZIP 1.x, Original Assembly And Operating Instructions

Page: 15 / 16

15
www.geiger.de
EN
EN
20. Technical data for SOLIDline motors
with 16 revolutions per minute
Technical data of tubular motor SOLIDline-KS (GU45..)
GU4506 GU4510 GU4520 GU4530
Voltage
230 V~/50 Hz
Current
0,36 A 0,47 A 0,63 A 0,8 A
Cos Phi (cos
j
)
>0,95
Inrush current (factor)
x 1,2
Power
83 W 105 W 140 W 180 W
Torque
6 Nm 10 Nm 20 Nm 30 Nm
Speed
16 rpm 16 rpm 16 rpm 16 rpm
Protection class
IP 44
Total length
1)
506,5 mm 516,5 mm 546,5 mm 566,5 mm
Operating mode S2 4 min S2 4 min S2 5 min S2 4 min
Sound pressure level
2)
39 dB(A) 39 dB(A) 41 dB(A) 41 dB(A)
Diameter
45 mm
Weight
approx. 1,85 kg approx. 1,90 kg approx. 2,20 kg approx. 2,40 kg
Storage temperature/
Humidity
T = -15°C .. +70°C / dry and non-condensing place
1)
SOLIDline-ROC + 8,9 mm / SOLIDline-COM + 3,5 mm / SOLIDline-SOC : + 3 mm /
SOLIDline-SIL : ± 0 mm (without trunnion)
2)
The average sound pressure level data are intended for guidance only. The values were determined by
Geiger at a distance of 1 m, with a hanging motor at idle speed and averaged over 10 seconds. There is no
reference to any specific test standard.
Subject to technical modifications. Please find information to the ambient
temperature range of our Geiger motors under www.geiger.de
D E
V
geprüfte
Sicherheit
21. Technical data for SOLIDline motors
with 55 revolutions per minute
Technical data of tubular motor SOLIDline-KS (GU45..)
GU4503/55 GU4506/55 GU4509/55 GU4512/55
Voltage 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Current 0,47 A 0,63 A 0,8 A 1,0 A
Cos Phi (cos
j
) >0,95 >0,95 >0,95 >0,95
Inrush current (factor) x 1,2 x 1,2 x 1,2 x 1,2
Power 105 W 140 W 180 W 220 W
Torque 3 Nm 6 Nm 9 Nm 12 Nm
Speed 55 rpm 55 rpm 55 rpm 55 rpm
Protection class IP 44 IP 44 IP 44 IP 44
Total length
1)
515,5 mm 545,5 mm 565,5 mm 585,5 mm
Operating mode S2 4 min S2 5 min S2 4 min S2 4 min
Diameter 45 mm 45 mm 45 mm 45 mm
Weight approx. 1,9 kg approx. 2,2 kg approx. 2,4 kg approx. 2,7 kg
Storage temperature/
Humidity
T = -15°C .. +70°C / dry and non-condensing place
1)
SOLIDline-ROC + 8,9 mm / SOLIDline-COM + 3,5 mm / SOLIDline-SOC : + 3 mm /
SOLIDline-SIL
: ± 0 mm (without trunnion)
Subject to technical modifications.
Please find information to the ambient temperature range of our Geiger motors under www.geiger.de