GEIGER GEIGER-Easy-ZIP 1.x Original Assembly And Operating Instructions Download

Page: 14 / 16

Gerhard Geiger GmbH & Co. KG | 100W1552

1118

V000

19. Declaration of conformity

Schleifmühle 6 | D-74321 Bietigheim-Bissingen

Phone +49 (0) 7142 9380 | Fax +49 (0) 7142 938 230 | [email protected] | www.geiger.de

Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRA 300591 | USt-IdNr. DE145002146

Komplementär: Geiger Verwaltungs-GmbH | Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRB 300481

Geschäftsführer: Roland Kraus | WEEE-Reg.-Nr. DE47902323

Gerhard Geiger GmbH & Co. KG

EU Declaration of Conformity

Bietigheim-Bissingen, 25.10.2018

Roland Kraus (General Manager)

Product designation:

Venetian blinds motor, motor for rolling shutters, motor for awnings

Type designation:

GR45..

GJ56..

GS45..

GS56..

GU45..

GSI56..

Applied directives:

2006/42/EC

2014/30/EU

2014/53/EU

2011/65/EU

Applied standards:

DIN EN 60335-1 (VDE 0700-1):2012-10; EN 60335-1:2012

DIN EN 60335-1 Ber.1 (VDE 0700-1 Ber.1):2014-04; EN 60335-1:2012/AC:2014

EN 60335-1:2012/A11:2014

DIN EN 60335-2-97 (VDE 0700-97):2017-05; EN 60335-2-97:2006+A11:2008+A2:2010

+A12:2015

DIN EN 62233 (VDE 0700-366):2008-11; EN 62233:2008

DIN EN 62233 Ber.1 (VDE 0700-366 Ber.1):2009-04; EN 62233 Ber.1:2008

DIN EN ISO 12100:2011-03; EN ISO 12100:2010

DIN EN 55014-1:2012-05; EN 55014-1:2006 + A1:2009 + A2:2011

DIN EN 55014-2:2016-01; EN55014-2:2015

DIN EN 61000-3-2:2015-03; EN 61000-3-2:2014

DIN EN 61000-3-3:2014-03; EN 61000-3-3:2013

ETSI EN 301 489-1 V1.9.2(2011-09)

ETSI EN 301 489-3 V1.6.1(2013-08)

ETSI EN 300 220-2 V3.1.1(2017-02)

Authorized representative for technical data:

Gerhard Geiger GmbH & Co. KG

Address:

Schleifmühle 6, D-74321 Bietigheim-Bissingen

Gerhard Geiger GmbH & Co. KG

Antriebstechnik

Schleifmühle 6

D-74321 Bietigheim-Bissingen

1018

100W1518

Current declarations of conformity are available under www.geiger.de

Summary of Contents for GEIGER-Easy-ZIP 1.x

















Search results

Summary of Contents for GEIGER-Easy-ZIP 1.x

Reviews:

Related manuals for GEIGER-Easy-ZIP 1.x

Brands by name

Popular brands

GEIGER GEIGER-Easy-ZIP 1.x, Original Assembly And Operating Instructions

Search results

Summary of Contents for GEIGER-Easy-ZIP 1.x

Reviews:

Related manuals for GEIGER-Easy-ZIP 1.x

Brands by name

Popular brands