1.
Locate Hanging Cleat
A.
The wall mounting cleat ships attached to the back of the overhead. Using a #2 Robertson bit screwdriver,
remove the cleat from the cabinet.
B.
Starting from the highest point of the floor, measure up to locate the hanging cleat (Detail A).
C.
Locate the hanging cleat on the line, centered on the space the overhead will hang. The hanging cleat is
made approximately 4" shorter than the cabinet to allow for lateral adjustment. Mark the rail with the drilling
locations required for mounting.
8 7/8"
to
bottom
of
hanging
cleat
DETAIL A
8 7/8"
to
bottom
of
hanging
cleat
72
1/4"
(plus
leveling)
83
1/4"
(plus
Leveling)
Geiger Levels
Right
ON SITE
Installation Principles
ROS-LVWP
Geiger Levels Wall Mount Project Shelf Overhead
1B5YL8