Page 28
5.
Attach L Return to Shroud and Flat Plates
A.
Carefully flip assembled return top upright.
B.
Set desk roughly in position to support end of return top.
C.
Lift return top over shroud and then down so that shroud bracket is within shroud (See Detail C),
and end of return rests on flat plates
D.
Align shroud bracket holes with shroud holes.
E.
Using (6x) 1/4"-20 x 1/2" machine screws, fasten shroud bracket to shroud.
F.
Set desk into final location and attach to return top to desk flat plates using #8 x 1" flat head wood screws
(50162).
G.
Level assembly.
Detail C
Shroud bracket inserts inside
shroud
Holes align
1/4-20 x 1/2" machine screws
attach
(6x) 1/4-20 x 1/2" machine screws
(8x) #8 x 1" flat head wood
screws
Geiger Levels
Right
ON SITE
Installation Principles
ROS-LVBD
Geiger Levels Bi Level Desks
1B6SZ6