1. Attach Closed Cell Foam
A.
Cut two strips of the closed cell foam to the width of the end panel.
B.
Peel off the paper backing, exposing the adhesive side and attach to the bottom edge of the end panels.
2. Attach Stabilizer Brackets to Worksurface
A.
Locate stabilizer brackets 2 3/4" in from where upper storage end panels will be placed.
B.
Fasten stabilizer brackets to back edge of worksurface below upper storage using (2x per bracket)
1 3/4" titus screws (59341).
Note: Upper storage shown for
illustration purposes. Upper
storage installed
in next step.
2 3/4"
Geiger Levels
Right
ON SITE
Installation Principles
ROS-LVUS
Geiger Levels Upper Storage
1B5VJJ