![background image](http://html.mh-extra.com/html/gehl/v270/v270_operators-manual_2205865027.webp)
917387/BP0310
23
5. Restart engine.
6. Slowly lower the lift arm until it engages and locks against the lift arm sup-
port device.
7. Stop the engine, and exit that machine.
Removal
The safest method of installing and removing the lift
arm support device requires two people – one person
inside the loader and another person outside the loader to install the support
device.
To return the lift arm support device to its storage position:
1. Start the engine;
2. Raise the lift arm fully;
3. Stop the engine;
4. Verify that the lift arm is being held in the raised position by the safety inter-
lock system.
With the key
switch OFF
and the solenoid valve for the
safety interlock system func-
tioning properly, the lift arm will
stay raised when the lift control is
moved to “lower”. If the lift arm
moves, do NOT leave the oper-
ator’s compartment. Instead, have
an assistant remove the support
device for you. Then, contact your
Gehl dealer to determine the
reason why the lift arm lowers while the key switch is in the OFF
position.
5. Have an assistant remove the lift arm support device.
A) Or, if an assistant is not available verify that the lift arm is being held in
the raised position, and then exit the machine, remove the lift arm support
device and carefully re-enter the machine.
6. Lower the lift arm and secure the lift arm support device with the hand knob
in the storage location (Figure 4).
Accessory Plug
The 12-v accessory plug is located at the bottom of the right instrument panel.
WARNING
Figure 4 Lift Arm Support
Device Storage Location
WARNING
Summary of Contents for V270
