Gehl V270, Operator'S Manual

Page: 17 / 102

917387/BP0310 13
ISO-Style (used Internationally)
Safety Decals inside the ROPS/FOPS
A – Forward tip hazard: Fasten seat belt. Carry load low. Do
not exceed Rated Operating Load.
B – Side tip hazard: Avoid steep slopes and high speed turns.
Travel up and down slopes with heavy end uphill.
C – Crush hazard: Keep out from under lift arm unless lift arm
is supported.
D – Crush hazard: Keep hands, feet and body inside cab when
operating.
Safety alert: Read Operator’s
Manual and all safety signs
before using machine. The
owner is responsible to ensure
all users are instructed on safe
use and maintenance.
242568 – Located behind
operator’s left shoulder
242246 – Located on left instrument panel
Safety alert: Always follow
“Mandatory Safety Shutdown
Procedure” in Operator’s Manual.
1 – Lower equipment to ground.
2 – Reduce throttle, stop engine.
3 – Apply parking brake; remove
key.
4 – Check safety interlocks.
242590 –
Located on left
instrument
panel
Safety alert:
A – Check machine before
operating; Service per
Operator’s Manual. Contact
dealer (or manufacturer) for
information and service parts.
B – Maintain 3-point contact during
entry and exit.
C – Inspect work area. Avoid all
hazards. Look in direction of
travel. Keep children and
bystanders away.
D – Start and operate machine only
from seat.
E – Keep away from power lines;
avoid contact.
F – Wear any needed Personal
Protective Equipment. Do not
wear loose clothing while
operating or servicing machine.
A B
C
D
E
F
137843 – Located on operator’s lower
right side
A
B
C
D
A
B
C D
E F
242408 – Located on operator’s lower
left side
A
B
C
D